To Next PageTo Next PageWhy isn't the image from my computer showing on the Panasonic Projector?
If the image from a computer is not appearing on your Panasonic Projector, check if the cable is too long (for D-Sub cables, ensure it's 10 m (32'10") or shorter). Also, verify that the external video output on the laptop is set correctly, possibly by pressing “Fn” + “F3” or “Fn” + “F10” simultaneously, though the method varies by computer type.
Why is my Panasonic PT-RS20K Projector remote control not working?
If the remote control for your Panasonic Projector isn't responding, check if the batteries are depleted and ensure their polarity is correct. Verify that the button operation isn't disabled by the button and that there are no obstructions between the remote and the projector's receiver. Ensure the remote is within its effective range and that other light sources aren't interfering. Check if the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE], or if the terminal is used for contact control. Finally, verify the ID number setting operation is correct.
How to resolve a fuzzy image on a Panasonic PT-RS20K Projector?
If the image from your Panasonic Projector is fuzzy, check if the lens focus is set correctly and that the projection distance is appropriate. Ensure the lens is clean and that the projector is installed perpendicular to the screen.
What to do if my Panasonic PT-RS20K Projector has no image?
If your Panasonic Projector displays no image, first check if the connections to external devices are correctly performed. Ensure the correct image input is selected and that the [BRIGHTNESS] adjustment isn't at its minimum. Verify the external device connected to the projector is working properly and that the shutter function is not in use. Confirm the projection lens is attached correctly and the lens cover is removed. If the power indicator is blinking red, consult your dealer.
How to fix reversed left and right images on Panasonic Projector?
If the left and right images are reversed (not showing properly) on your Panasonic Projector, ensure it is synchronized and check the 3D eyewear settings. You can also try changing the [LEFT/RIGHT SWAP] setting in [3D SETTINGS].
Why does Panasonic Projector image not display correctly?
If the image does not display correctly on your Panasonic Projector, ensure that the [SYSTEM SELECTOR] selection is set correctly and that the [RGB1 INPUT SETTING] is also configured correctly. Check if there is an issue with the external device outputting images, and verify that the input signal is compatible with the projector.
What to do if buttons on Panasonic Projector control panel do not operate?
If the buttons on the control panel of your Panasonic Projector do not operate, check if the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE]. Also, verify whether the terminal is being used for contact control.
What to do if image output from DVI-D of computer does not appear on Panasonic PT-RS20K Projector?
If the image output from DVI-D of the computer does not appear on your Panasonic Projector, check if [EDID SELECT] in [DVI-D IN] is set to [EDID3] or [EDID2:PC]. You may also need to update the graphics accelerator driver of the computer to the latest version. Additionally, making the [EDID SELECT] setting in [DVI-D IN] and then restarting the computer may improve the condition.
What to do if DIGITAL LINK input image is not displayed on Panasonic Projector?
If the DIGITAL LINK input image is not displayed on your Panasonic Projector, verify that the cable is compatible with the projector's condition. Also, ensure that the connections between the twisted-pair-cable transmitter and the projector or an external device are correctly done. Check that [DIGITAL LINK MODE] is set to [AUTO], [DIGITAL LINK], or [LONG REACH] and not set to [ETHERNET]. Finally, confirm that a compatible signal is being input to the twisted-pair-cable transmitter.
How to fix Panasonic PT-RS20K Projector when image from computer does not appear?
If the image from a computer does not appear on your Panasonic Projector, ensure that the cable is not too long (if using D-Sub cables, the length should be 10 m (32'10") or shorter). Also, verify that the external video output on the laptop is set correctly. For example, you may need to press “Fn” + “F3” or “Fn” + “F10” simultaneously, but the method varies depending on the computer type.
General| Brightness | 20, 000 lumens |
|---|---|
| Resolution | 1920 x 1200 (WUXGA) |
| Light Source | Laser |
| Contrast Ratio | 20, 000:1 |
| Light Source Life | 20, 000 hours |
| Lens Shift | Horizontal: ±30% |
| Input Terminals | HDMI, DVI-D, 3G-SDI |
