Chapter 2 Getting Started — Attaching/removing the projection lens (optional)
ENGLISH - 47
Removing the projection lens
Remove the projection lens using the following procedure.
Lens release button
Fig. 1
1) Remove the lens fixing screw.
f Use a Phillips screwdriver to remove the rst screw to the right of the mark on the projection lens (orange).
2) Remove the projection lens by turning it counterclockwise while pressing the lens release button.
(Fig. 1)
f Turn the projection lens counterclockwise until the mark on the projection lens (orange) is aligned with the
mark on the projector (E to the left of LOCK).
Note
f Some lenses may not have a screw hole to use to secure the projection lens.
Attention
f Store the removed projection lens where it will be free from vibration and impact.
f Store the removed lens xing screw in a safe place.
To Next Page
Loading...
