Panasonic PT-RZ11K

Chapter 4 Settings — Menu navigation
ENGLISH - 79
Sub-menu item Factory default Page
[INPUT RESOLUTION] ― 96
[CLAMP POSITION] [24]
*1
96
[EDGE BLENDING] [OFF] 97
[FRAME RESPONSE] [NORMAL] 98
[FRAME CREATION] [2] 99
[FRAME LOCK] ― 99
[RASTER POSITION] ― 100
*1 Depends on the signal input.
Note
f Sub-menu items and factory default settings vary depending on the selected input terminal.
[DISPLAY LANGUAGE]
Details (x page 101)
[3D SETTINGS]
Sub-menu item Factory default Page
[3D SYSTEM SETTING] [SINGLE] 102
[3D SYNC SETTING] ― 102
[3D INPUT FORMAT] [AUTO]
*1
103
[LEFT/RIGHT SWAP] [NORMAL] 103
[3D COLOR MATCHING] [SHARED 2D/3D] 103
[3D PICTURE BALANCE] ― 104
[DARK TIME SETTING] [1.5ms] 104
[3D FRAME DELAY] [0us] 105
[3D TEST MODE] [NORMAL] 105
[3D TEST PATTERN] ― 105
[SAFETY PRECAUTIONS MESSAGE] [ON] 106
[3D SAFETY PRECAUTIONS] ― 106
*1 Varies depending on the selected input terminal.
[DISPLAY OPTION]
Sub-menu item Factory default Page
[COLOR MATCHING] [OFF] 107
[LARGE SCREEN CORRECTION] [OFF] 108
[SCREEN SETTING] ― 108
[AUTO SIGNAL] [OFF] 109
[AUTO SETUP] ― 109
[BACKUP INPUT SETTING] ― 110
[SIMUL INPUT SETTING] ― 111
[RGB IN] ― 112
[DVI-D IN] ― 113
[HDMI IN] ― 114
[DIGITAL LINK IN] ― 115
[SDI IN] ― 117
[ON-SCREEN DISPLAY] ― 118
[IMAGE ROTATION] [OFF] 120
[BACK COLOR] [BLUE] 120
[STARTUP LOGO] [DEFAULT LOGO] 120
[UNIFORMITY] ― 121
[SHUTTER SETTING] ― 121
[FREEZE] ― 123