Panasonic PT-RZ120BEJ

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 57
How to remove the power cord
For India (when using the power cord with the lock button)
Fig. 1 Fig. 2
Lock button
1) Confirm that the <MAIN POWER> switch on the side of the projector is on the <OFF> side, and
remove the power plug from the outlet.
2) Raise the power cord holder fixing the power cord upward. (Fig. 1)
f Fix the power cord holder by snapping into the projector.
3) Remove the power cord connector from the <AC IN> terminal of the projector while pressing the lock
button. (Fig. 2)
For other countries or regions (when using the power cord without the lock button)
Fig. 1 Fig. 2
1) Confirm that the <MAIN POWER> switch on the side of the projector is on the <OFF> side, and
remove the power plug from the outlet.
2) Raise the power cord holder fixing the power cord upward. (Fig. 1)
f Fix the power cord holder by snapping into the projector.
3) While holding the power cord connector, pull out the power cord from the <AC IN> terminal of the
projector. (Fig. 2)
Power indicator
Indicate the status of the power. Check the status of the power indicator <ON (G)/STANDBY (R)> before operating
the projector.
Power indicator <ON (G)/STANDBY (R)>
Indicator status Projector status
Off The main power is switched off.