Chapter 4 Settings — [PICTURE] menu
90 - ENGLISH
3) Press as to select [PICTURE MODE].
4) Press qw to set [REC709].
5) Press as to select [GAMMA].
6) Press qw or the <ENTER> button.
f The [GAMMA] individual adjustment screen is displayed.
7) Press qw to select [2.2].
8) Press as to select [COLOR].
9) Press the <DEFAULT> button on the remote control to set the factory default setting.
10) Follow Steps 8) - 9) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], [GAMMA], and [SYSTEM
DAYLIGHT VIEW] to the factory default settings.
Note
f sRGB is available for RGB signal input only.
To Next Page
Loading...
