Chapter 7 Appendix — Specications
ENGLISH - 205
Color system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projected image size
*5
1.27 m (50") to 15.24 m (600")
Image aspect ratio
PT‑RZ970, PT‑RW930 16:10
PT-RX110 4:3
Projection method [FRONT/REAR]/[FLOOR/CEILING]
Power cord length 3.0 m (118-1/8")
Outer case Molded plastic
Outer color
Black model Black
White model White
Dimensions
Width 498 mm (19-19/32")
Height 200 mm (7-7/8") (with legs at shortest position)
Depth
PT‑RZ970, PT‑RW930, PT‑RX110 581 mm (22-7/8") (including standard zoom lens)
PT‑RZ970L, PT‑RW930L, PT‑RX110L
538 mm (21-3/16") (excluding the Lens Mount Cover
and optional lens)
Weight
PT‑RZ970, PT‑RW930, PT‑RX110
Approx. 23.2 k] (51.1 lbs.)
*6
(including standard zoom
lens)
PT‑RZ970L, PT‑RW930L, PT‑RX110L
Approx. 22.4 k] (49.4 lbs.)
*6
(excluding the Lens Mount
Cover and optional lens)
Noise level
*3
41 dB
Operating
environment
Operating
environment
temperature
*7
0 °C (32 °F) to 45 °C (113 °F)
Operating
environment
humidity
10 % to 80 % (no condensation)
Remote
control
Power supply DC 3 V (AAA/R03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 The lens for PT-RZ970L series, PT-RW930L series, and PT-RX110L series is sold separately.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*4 The value of the light output at the center region of the projected image is extracted based on the light output measurement method dened by the
ISO/IEC 21118:2012 international standards.
*5 When the lens ET-DLE055 is used, the maximum size is 5.08 m (200"). When the lens ET-DLE030 is used, the maximum size is 2.54 m (100") to
8.89 m (350").
*6 Average value. Weight varies for each product.
*7 When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C
(86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2 700 m (8 858') and
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the
projector.