Powering ON/OFF
ENGLISH -
25
Basic Operation
POWER indicator
The power indicator informs you the status of the power
. Conrm the status of the <POWER> indicator before
operating the projector.
Indicator status Status
No illumination or ashing The power cord is unplugged.
RED
Lit
The power cord is plugged.
The projector is in stand-by mode, after the cooling is completed.
Flashing
The projector cannot be turned on until the normal power-off processing for fan
cooling is completing and the <POWER> indicator stops blinking.
The temperature inside the projector is abnormally high. And the <WARNING>
indicator also blinks in red (
Æ
page 59). The projector cannot be turned on until
cooling is completing and the <POWER> indicator stops blinking.
GREEN
Lit Projecting.
Flashing The projector is in the Power management mode.
To Next Page