Panasonic PT-VX400 - Total Power Savings; Warning Log; Factory Default

Setting
ENGLISH -
57
Settings
Press ▲▼ to set the Timer.2 )
Select from [Off/1000H/2000H/3000H/40
z
00H/5000H/6000H] depending on the use
environment.
Filter counter reset
J
After replacing the lter, be sure to reset the timer.
Press ▲▼ to select [Filter counter 1 )
reset].
Press the <SELECT> button. 2 )
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another conrmation dialog
box appears, select [Yes] to reset the [Filter
counter].
Total power savings
This function displays the saved amount of power and
the exhausted CO2 of the projector.
Press ▲▼ to select [Total power 1 )
savings] and then press the <SELECT>
button.
Show the total accumulated power savings of
z
the projector and display the total amount of
CO2 exhausted from the projector.
Press the <SELECT> button to reset 2 )
the gures of the total power savings
and the exhausted
CO2.
[Total power savings Reset?] appears. Select
z
[Yes] to continue. Another conrmation dialog
box appears, select [Yes] to reset the [Total
power savings].
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing
faults.
Press ▲▼ to select [Warning log].1 )
Press ► or the <SELECT> button to 2 )
display the latest warning message.
Up to 10 warning logs are displayed with the
z
latest warning message at the top of the list,
followed by previous warning messages in
chronological order.
Attention
When the [Factory default] function is executed, all
z
the warning log records will be deleted.
Factory default
This function returns all setting values except for [PIN
code lock], [Logo PIN code lock], [Lamp power], [Filter
counter] and [Total power savings] to the factory
default settings.
Press ▲▼ to select [Factory default].1 )
Press the <SELECT> button.2 )
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another conrmation dialog
box appears, select [Yes] to return to [Factory
default].