Large Medium Small
Metal mesh Urethane
Hole punched (metal)
Dust
Input signal level DarkBright
Input signal level
Lamp outputLamp output
DarkBright
Up to
70%
Normal mode
Eco mode
NEW
A Full 4,000 lm/3,000 lm*
2
of Brightness and
2,000:1 Contrast
A remarkable 4,000 lm/3,000 lm*
2
of brightness and 2,000:1 contrast have
been achieved in a compact, easy-to-carry body, weighing only 3.6 kg (7.9 lb)
or less.*
1
Bright, clear images enhance a variety of viewing situations and
applications.
Intelligent Lamp Control System Reduces
Power Consumption
When the lamp power is set
to Auto, the intelligent lamp
control system automatically
adjusts the lamp output in
accordance with the brightness
of the projected image and
reduces it by up to 70%. It
also combines with color shift
correction, which corrects the
shift in the color balance that
occurs when the lamp output
drops. As a result, power
consumption is effectively
reduced while excellent color
reproduction is maintained.
Environmentally Friendly Standby Power
Consumption of Only 0.48 W*
6
When the Standby mode is set to Eco, the standby power consumption is
low at 0.48 W.*
6
This lowers running costs, and helps to reduce environment
impact.
Displaying the Total Amount of Reduced
Power Consumption and CO2 Emission
When the lamp power is set to
Eco1, Eco2 or Auto, you can display
the total amount of reduced power
consumption and decreased CO
2
emission compared to when the
lamp power is set to Normal.
It can be shown by day, month
or year. Quantitatively checking
these reduction amounts helps to
increase the awareness of energy
saving and the environment.
A Maximum 5,000-Hour*
3
Lamp Replacement
Cycle and 6,000-Hour*
4
Air Filter Replacement
Cycle
These handy portables offer a lamp replacement cycle of up to 5,000
hours*
3
for extended, maintenance-free use. Three-layered air filters, in
which each layer contains a different mesh size, are installed in two parts
of the body. Increasing the filters’ surface area made it possible to achieve a
replacement cycle of up to 6,000 hours.*
4
This reduces maintenance hassles
for long periods of use, and helps to lower maintenance costs and reduce
environmental impact.
Superb Performance
in a Compact, 3.6-kg (7.9-lb) Body
*
1
Versatile Eco Performance
Helps the Environment
Quiet 29-dB*
5
Design Does Not Interrupt
Meetings or Classes
The quiet design keeps noise levels down to 29 dB,*
5
so the sound of the
cooling fan is hardly noticeable. This helps the audience to keep their
attention on the speech when someone is giving a presentation or on the
screen images during quiet scenes.
3-Layer Air Filter
Bright scene Dark scene
Intelligent Lamp Control System
Conventional Lamp System
3,000 lm 4,000 lm 4,000 lmSide-by-Side/P-in-P Wireless FunctionWXGA XGA XGA
VW330 VX400NT VX400 VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
PT-VW330 PT-VX400NT PT-VX400
* Product numbers vary depending on the market. The product number in North America and Taiwan is PT-VW330U, VX400NTU and PT-VX400U. The product number in Europe (except UK) and CIS is
PT-VW330E, VX400NTE and PT-VX400E. The product number in UK, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-VW330EA, VX400NTEA and PT-VX400EA.
Air Filter Unit
***
*1 Weight by model: PT-VX400NT: approx. 3.6 kg (7.9 lb), PT-VW330/VX400: approx. 3.5 kg (7.7 lb). *2 The PT-VX400NT/VX400 has 4,000 lm and the PT-VW330 has 3,000 lm of brightness. *3 This is the
maximum value when the lamp power is set to Eco1 or Eco2, with the lamp turned on for 2 hours and off for 0.25 hour. Increases in the lamp on cycle or extended use with the lamp continuously turned on will
shorten the lamp replacement cycle. When the lamp power is set to Normal, the lamp replacement cycle is 3,000 hours. The usage environment affects the lamp replacement cycle. *4 With the lamp power
set to Eco1 or Eco2. The usage environment affects the duration of the filter. *5 With the lamp power set to Eco1 or Eco2. *6 Standby mode: Eco. When the Standby mode is set to Eco, network functions such
as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.
To Next Page
Loading...
