About Your Projector
22
- ENGLISH
Preparation
Control panel
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(1) <SELECT> Button
Execute the selected item.
(2) ▲▼◄► (VOL -/+) Buttons
_
Navigate the MENU display.
_
Adjust the volume level or mute the sound.
(3) <INPUT> Button
Selects the input signal. (
Æ
page 38)
(4) <ON/STAND-BY> Button
Turn the projector on/off.
(5) <POWER> indicator
Indicate the power status.
(6) <MENU> Button
Displays the MENU screen. (
Æ
page 40)
(7) <AUTO SETUP/CANCEL> Button
Execute the setting of Auto setup in the setting
menu. (
Æ
page 56)
Cancel the playing of the memory viewer function.
(Refer to "Operating Instructions - Network
operations").
(8) <WARNING> indicator
Indicate the abnormal conditions of the projector.
(9) <LAMP REPLACE> indicator
Lights yellow when the projection lamp reaches its
end of life.
To Next Page
Loading...
