Panasonic PT-VX615N - Page 128

Example of E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Type : PT-VZ585N
Serial No : SH1234567
----- check system -----
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
EXHAUST AIR TEMPERATURE [ OK ]
LAMP REMAIN TIME [ OK ]
LAMP STATUS [ FAILED ]
APERTURE (CONTRAST-SHUTTER) [ OK ]
AIR FILTER [ OK ]
(Error code 00 00 00 00 01 00 00 08)
Intake air temperature : 31 degC / 87 degF
Exhaust air temperature : 37 degC / 98 degF
PROJECTOR RUNTIME 750 H
LAMP NORMAL 100 H
LAMP ECO1 420 H
LAMP ECO2 420 H
LAMP REMAIN 4250 H
-------- Current status ---------
MAIN VERSION 1.00
NETWORK VERSION 1.00
SUB VERSION 1.00
LAMP STATUS LAMP=ON
INPUT RGB
----- Wired Network conguration -----
DHCP Client OFF
IP a dd ress 192.168.10.100
M AC a d dr e ss 04:20:9A:00:00:00
----- Wireless Network conguration -----
DHCP Client OFF
IP add re s s 192.168.0.100
M AC a d dr e ss 04:20:9A:00:00:00
----- Memo -----
[Command port set up] page
Set the port number used for command control.
Click [Detailed set up] → [Command port set up].
2
1
1 [COMMAND PORT]
Set the port number used for command control.
2 [Submit]
Update the settings.
128 - ENGLISH
Chapter 5 Operation of Function - Web control function