55
5
RQT9725
ENGLISHENGLISH
Disc
Basic play
1 Press [x, CD OPEN/CLOSE] to open the disc tray and then load the disc
with the label facing up.
2 Press [x, CD OPEN/CLOSE] again to close.
3 Press [CD 4/9] to start play.
Stop playback
Press [8] during play.
Pause play
Press [CD 4/9] during play.
Press again to resume play.
Skip tracks
Press [2/3] or [5/6] (main unit: [–/2] or
[6/+]).
During RANDOM or 1-ALBUM RANDOM play, you
cannot skip to tracks that have been played.
Search through
tracks
Press and hold [2/3] or [5/6] (main unit:
[–/2] or [6/+]) during play or pause.
• During program play (Z see right), or random play
(Z see below, “Play Mode function”), you can
search only within the track.
Skip album
Press [R/T, ALBUM] in the play mode.
Press [R/T, ALBUM] once and then the numeric
buttons in the stop mode.
Play Mode function
Press [PLAY MODE] to select the desired mode.
1-TRACK Play one selected track on the disc.
Press the numeric buttons to select the track.
RX-D53
1TR
RX-D48
1-
1-ALBUM
Play one selected album on the disc.
Press [R/T, ALBUM] to select the album.
RX-D53
1ALBUM
RX-D48
ALBUM
RANDOM Play a disc randomly.
RX-D53
RND
RX-D48
RND
1-ALBUM RANDOM
Play all tracks in one selected album randomly.
Press [R/T, ALBUM] to select the album.
RX-D53
1ALBUM RND
RX-D48
ALBUM
RND
Checking the track information
You can view the information of the current track from the display panel.
Press [DISPLAY] repeatedly during play or pause.
Elapsed
play time
Remaining
play time
RX-D53
Elapsed play time
Track name Album name
RX-D53
Press [MP3 INFO] repeatedly during play or pause.
ID3 (Album) ID3 (Track) ID3 (Artist) Elapsed play time
Note:
• This unit supports ver. 1.0 and 1.1 ID3 tags.
• ID3 is a tag embedded in MP3 track to provide information about the track.
• Titles containing text data that the unit does not support may be displayed
differently.
•
RX-D48
Display for MP3 shows only “Elapsed play time”.
Advanced play
Repeat play
You can repeat program play or other selected play mode.
To activate
Press [REPEAT].
RX-D53
“ON REPEAT” and “ ” are displayed.
RX-D48
“ ” is displayed.
To cancel
Press [REPEAT] again.
RX-D53
“OFF REPEAT” is displayed and “ ” is cleared.
RX-D48
“ ” is cleared.
Program play
This function allows you to program up to 24 tracks.
1 Press [CD 4/9] and then [8].
2 Press [PROGRAM].
“PGM” is displayed.
3 Press the numeric buttons to select your desired track.
Repeat this step to program other tracks.
4 Press [CD 4/9] to start play.
1 Press [CD 4/9] and then [8].
2 Press [PROGRAM].
“PGM” is displayed.
3 Press [R/T, ALBUM] to select your desired album.
4 Press [5/6] once and then the numeric buttons to select your
desired track.
5 Press [OK].
Repeat steps 3 to 5 to program other tracks.
6 Press [CD 4/9] to start play.
Cancel program
mode
Press [PROGRAM] in the stop mode.
Replay the program
Press [PROGRAM] then [CD 4/9] in the stop mode.
Check program
contents
Press [2/3] or [5/6] (main unit: [–/2] or
[6/+]) when “PGM” is displayed in the stop mode.
To check while programming, press [PROGRAM]
twice after “PGM” appears, then press [2/3] or
[5/6].
Add to the program
Repeat step 3 in the stop mode.
Repeat steps 3 to 5 in the stop mode.
Clear the last track Press [DEL] in the stop mode.
Clear all
programmed tracks
Press [CLEAR] in the stop mode.
“CLR ALL”
RX-D53
(“CLEAR”
RX-D48
) is displayed.
Note:
• When you try to program more than 24 tracks, “PGM FULL”
RX-D53
(“FULL”
RX-D48
) appears.
• The program memory is cleared when you open the disc tray.
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical
specifications of the Compact Disc Digital Audio (CD-DA) format so playback
may not be possible.
Note on CDs
Choose discs with this mark:
• This unit can access up to 99 tracks.
• This unit can play MP3 files and CD-DA format audio CD-R/RW that have
been finalised.
• It may not be able to play some CD-R/RW due to the condition of the
recording.
• Do not use irregularly shaped disc.
• Do not use disc with labels and stickers that are coming off or with adhesive
exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.
Note on MP3
• Files are treated as tracks and folders are treated as albums.
• This unit can access up to 999 tracks, 255 albums and 20 sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for extended formats).
• To play in a certain order, prefix the folder and file names with 3-digits
numbers in the order you want to play them.
Limitations on MP3 play
• If you have recorded MP3 on the same disc as CD-DA, only the format
recorded in the first session can be played.
• Some MP3s may not be played due to the condition of the disc or recording.
• Recordings will not necessarily be played in the order you recorded them.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
RX-D53.48_RQT9725-G_1en.indd 5RX-D53.48_RQT9725-G_1en.indd 5 7/17/2012 4:18:58 PM7/17/2012 4:18:58 PM
To Next Page
Loading...
