Panasonic RX-ES25

The Radio
Preparation: (when using batteries) Press [ENMETU J.
Preset tuning
Tuning is simpler if you preset stations.
You can preset 12 FM and 12 AM stations.
-Ù Presetting radio stations
Preparation: Tune to the station you want to preset. (=> page 10)
T Press [MEMORY -CLEAR].
While “ ” is flashing
Turn [TIME/PRESET TUNE --CD SKIP —-] to select
a channel and press PMEMORY - CLEAR].
On the remote control
Press the numbered button(s) to enter the statlon into a
channel (1 to 12).
To enter channel 10, 11 or 12
Press [210], then the two digits.
If“ ” goes off during presetting, return to step D.
Selecting channels
Preparation: Press [TUNER BAND] to select “FM” or “AM”.
EJ Turn {TIME/PRESET TUNE --CD SKIP —] to select
the channel.
On the remote contro!
Press the numbered button(s) to select the channel (1 to 12).
To select channe! 10, 11 or 12, press [210], then the two digits.
(em Using preset scan
You can search for a station by listening to all preset channels for 8
seconds each.
Remote control onl
Preparation: Press [TUNER] to select “FM” or “AM”.
i Press and hold [Ka /V ] or [A/m ] until “PS”
appears on the display.
Preset scan starts.
2 Press [HK /V] or [^/P] when you find the
desired channel.
Preset scan ends after searching through each preset channel once.
To stop during the process, press a/v] or [A / b> b> J.
Cancelling a preset channel
e.g. If channel 3 is not needed
G) Select channel 3.
© Press [MEMORY = CLEAR].
© While " "is flashing
Turn [TIME/PRESET TUNE --CD SKIP —~] to display “= —”.
@ Press [MEMORY = CLEAR].
Now, when you perform preset scan or turn [TIME/PRESET TUNE
--CD SKIP -~] to select a preset channel, channel 3 is skipped.
* To select the cancelled channel, press the remote control's num-
bered buttons.
. You can press [a/v] or [A/1] on the remote control for
turning of [TIME/PRESET TUNE--CD SKIP --] described
above.
Listening
I]
RQT5183