You can adjust the tone (BASS and TREBLE) only when the DSP
sound mode is STEREO and input is either analog or PCM. You
cannot adjust the tone while the DSP is defeated.
1 Press [BASS/TREBLE, BALANCE].
Each time you press the button:
BASS / TREBLE / BALANCE
↑
BASS: To adjust the bass
TREBLE: To adjust the treble
BALANCE: To adjust the left/right sound balance
2 Press [–, L] or [+, R].
–, L: to lower the selected tone or shift the balance to the left
speaker.
+, R: to raise the selected tone or shift the balance to the
right speaker.
The previous display returns after a few seconds.
18
RQT5908
1
2
B
qq
Press [SPEAKERS] to turn off the speakers.
Turning the speakers off automatically engages STEREO mode
and ensures no sound is heard from the subwoofer.
(Sound will seem unusual if you use another DSP mode.)
ww
Reduce the volume.
ee
Connect the headphones (not included).
Plug type: 6.3 mm (1/4") stereo
rr
Adjust the volume.
Avoid listening for prolonged periods of time to prevent hearing
damage.
Note
Using headphones
B
Headphones