9 Optical Pickup Self-Diagnosis and Replacement
Procedure (DVD Section)
9.1. Self-diagnosis
This unit is equipped with the optical pickup self-diagnosis function and the tilt adjustment check function. Follow the procedure
described below during repair in order to perform self-diagnosis and tilt adjustment effectively. Especially when "NO DISC" is
displayed, be sure to apply the self-diagnosis function before replacing with an optical pickup. Replacement of optical pickup
generally requires when the present value of laser drive exceeds 55.
Note:
Start diagnosis within three minutes after turning on the power (as diagnosis fails when the unit becomes warm).
13
SA-HT833VP
To Next Page
Loading...
