Pin
No.
Terminal
Name
I/O Function
54 18dB O 18db attenuator/EEPROM clock
55 ECS O EEPROM chip select output
signal
56 WIDE2 O DVD control output signal
57 WIDE1 O DVD control output signal
58 LCD
CLS
O Display close control output
signal
59 LCD
OPN
O Display open control output
signal
60 ECHO
DAT
O Echo data output signal
61 ECHO
CLK
O Echo clock output signal
62 EHCO
LATCH
O Echo latch output signal
63
/ |
/
100
SEG37
/ | /
SEG0
O LCD segment output signal
15. Replacement Parts List
Notes:
- Important safety notice : / Component identified mark have
special characteristics important safety. / Furthermore, special
parts which have purposes of fire-retardant (resistors), hight-
quality sound (capacitors), low-noise (resistors),etc. are used. /
When replacing any of components, be sure to use only
manufactures specified parts shown in the parts list.
- The <ODSD> mark in Remarks indicates source of supply.
- The marking (RTL) indicates thet Retention Time is Limited for this
item. After the discontinuation of this assembly in production, the
item will continue to be available for a specific period of item. The
retention period of availability is dependenton the type of
assembly, and in accordance with the laws governing part and
product retention. After the end of this period, the assembly will on
longer be available.
- [M] indicates in the remarks columns indicates parts supplied by
MESA .
31
To Next Page
Loading...
