Panasonic SA-UX100E - Product Specifications

8
3 Specifications
Q Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
150 W per channel (4 Ω), 1 kHz, 30% THD
Total RMS stereo mode power 300 W
PMPO output power 3300 W (For GN/GS)
Q Tuner, terminals section
Frequency modulation (FM)
Preset memory 30 stations
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals 75 Ω (unbalanced)
Analog audio input
Audio input Pin jack (1 system)
Q Disc section
Disc played (8 cm or 12 cm)
CD, CD-R/RW (CD-DA, MP3*)
* MPEG-1 Layer 3
Pick up
Wavelength 790 nm (CD)
Q USB section
USB port
USB standard USB 2.0 full speed
Media file format support MP3 (*.mp3)
USB device file system FAT12, FAT16, FAT32
Q Bluetooth
®
section
Version
Bluetooth
®
Ver. 2.1 + EDR
Class Class 2
Supported profiles A2DP, AVRCP, SPP
Operating frequency 2.4 GHz band FH-SS
Operation distance 10 m line of sight
Q General
Power supply
AC 220 V to 240 V, 50 Hz (For E/GN)
AC 220 V to 240 V, 50/60 Hz (For GS)
Power consumption 49 W
Dimensions (W x H x D) 250 mm x 132 mm x 227 mm
Mass 1.7 kg
Operating temperature range 0 °C to +40 °C
Operating humidity range 35% to 80% RH
(no condensation)
Power consumption in standby
mode (approximate)
0.5 W
Power consumption in standby
mode (approximate)
(With “BLUETOOTH STANDBY”
set to “ON”)
0.6 W
Note:
1. Specifications are subject to change without notice.
Mass and dimension are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Q System: SC-UX100E-K
Main Unit: SA-UX100E-K
Speakers: SB-UX100GN-K
Q System: SC-UX100GN-K
Main Unit: SA-UX100GN-K
Speakers: SB-UX100GN-K
Q System: SC-UX100GS-K
Main Unit: SA-UX100GS-K
Speakers: SB-UX100GN-K