To Next PageTo Next PageWhat to do if my Panasonic Stereo System displays 'TAKE OUT/DISC'?
If your Panasonic Stereo System displays 'TAKE OUT/DISC', it indicates a problem with the disc mechanism. Remove the disc from the tray. Ensure there is no disc in the tray, then close it.
Why does my Panasonic SC-AK321 sound stop?
Sound from your Panasonic Stereo System might stop for several reasons. First, ensure the volume isn't too low. Also, check the speaker connections and cords; incorrect connections can cause this issue. Keep the unit's cables away from AC power cords and fluorescent lights. If the problem persists and there is a power supply issue, consult the dealer. If you plugged in the AC power cord for the first time or there was a recent power failure, set the time. If the positive and negative speaker wires are shorting, or the speakers are strained due to excessive volume or power, switch off the unit, correct the cause, and then switch it back on. If an incorrect operation was performed, read the instructions and try again.
General| Bluetooth | No |
|---|---|
| CD Player | Yes |
| FM Radio | Yes |
| USB Port | No |
| Number of Discs | 1 |
| Tuner Bands | FM |
| Cassette Deck | No |
| Speakers | 2 |
| Type | Mini System |
| Speaker Configuration | 2.0 |
