ENGLISH
TQBJ2215
13
Listening to music on an
external equipment
You can connect a TV, DVD player, etc., to listen to the
music through this unit.
≥ Switch off all equipment before connection and read the
appropriate operating instructions.
≥ Disconnect the AC mains lead before connection. Do not
connect the AC mains lead until all other connections are
completed.
≥ Do not bend cables at sharp angles.
≥ Components and cables are sold separately.
≥ Sound distortion can occur when you use an adaptor.
≥ If you want to connect equipment other than those described,
refer to the audio dealer.
∫ Using the optical input
1 Connect the external equipment.
2 Turn this unit on.
3 Press [O, N SELECT] repeatedly to select “D-IN”.
4 Play the external equipment.
≥ This system supports linear PCM signal.
≥ Multi-channel source will be converged to 2 channels.
≥ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
≥ The sound is muted if the signal format or frequency is not
supported.
≥ Reduce the volume on the TV to its minimum, and then
adjust the volume of this unit.
∫ Using the auxiliary input
1 Connect the external equipment.
2 Turn this unit on.
3 Press [O, N SELECT] repeatedly to select “AUX”.
4 Play the external equipment.
e.g. TV
(not supplied)
Optical digital audio cable
(not supplied)
e.g.DVD player
(not supplied)
Audio cable
(not supplied)
SC-DM502E-TQBJ2215_eng_pol_cze.book 13 ページ ２０２０年１月１１日 土曜日 午前９時３２分
To Next Page
Loading...
