32
8.17. Disassembly of Cam Rail Bot-
tom & Door Slider Bottom
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Door Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Gear Block & Arm Spring (Top)”
Step 1 : Remove 2 screws.
Step 2 : Slightly lift up to remove Cam Rail Bottom.
Caution : During assembling, ensure Door Slider Bottom is
properly inserted into slot of Cam Rail Bottom.
Step 3 : Remove Door Slider Bottom.
To Next Page
Loading...
