Panasonic SC-HC397

42
8.28. Disassembly of Front Speaker
(SP1)
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of NFC P.C.B.”
• Refer to “(Step 1) - (Step 3) of item 8.21.”
• Refer to “Disassembly of CD Mechanism”
Caution : When assembled Button Ornament Unit, ensure
it is seated properly and all button operations are working.
Step 1 : Release 2P wire from slots.
Caution : During assembling, dressed 2P wire into slots of
Rear Panel Block.
Step 2 : Detach 2P wire at connector (CN401) on Main P.C.B..
Step 3 : Remove 3 screws.
Step 4 : Remove Speaker Cabinet Unit (L).
Step 5 : Desolder speaker wire at the terminals on Front
Speaker (SP1).
Step 6 : Remove 4 screws.
Step 7 : Remove Front Speaker (SP1).