Panasonic SC-HC397

36
8.21. Disassembly of FL P.C.B. &
Button Ornament Unit
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of NFC P.C.B.”
Caution : During assembling, ensure Button Ornament
Unit is fully seated and all button operations are working.
Step 1 : Remove 2 screws.
Step 2 : Detach 14P FFC at connector (CN900) on Button
P.C .B . .
Step 3 : Lift up FL P.C.B. and Button Ornament Unit.
Step 4 : Detach 6P connector (P900) on FL P.C.B..
Step 5 : Remove FL P.C.B..
8.22. Disassembly of Button P.C.B.
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of NFC P.C.B.”
• Refer to “Disassembly of FL P.C.B.”
Step 1 : Remove 4 screws.
Step 2 : Release catches.
Caution : During assembling, ensure Button P.C.B. is fully
catched to Top Button.
Step 3 : Remove Button P.C.B..