41
Step 4 : Detach 14P FFC at connector (CN6007) on Main
P.C.B..
Step 5 : Detach 2P wire at connector (CN400) on Main P.C.B..
Step 6 : Detach 2P wire at connector (CN401) on Main P.C.B..
Step 7 : Release catches.
Step 8 : Slightly lift up to remove Main P.C.B..
8.27. Disassembly of Main P.C.B.
(For HC397)
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of NFC P.C.B.”
• Refer to “Disassembly of SMPS Unit”
• Refer to “(Step 1) - (Step 3) of item 8.21.”
• Refer to “Disassembly of CD Mechanism”
• Refer to “(Step 1) - (Step 5) of item 8.25.”
Step 1 : Detach 2P wire at connector (CN400) on Main P.C.B..
Step 2 : Detach 2P wire at connector (CN401) on Main P.C.B..
Step 3 : Release catches.
Step 4 : Slightly lift up to remove Main P.C.B..
To Next Page
Loading...
