81
14 Appendix Information of Schematic Diagram
14.1. Voltage Measurement
Note:
• Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with
the chassis taken as standard.
Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
• Circuit voltage and waveform described herein shall be regarded as reference information when probing defect point because it
may differ from actual measuring value due to difference of Measuring instrument and its measuring condition and product itself.
14.1.1. CD INTERFACE, FL, SMPS & DAB ADAPTER (For HC397) P.C.B.
REF NO.
MODE E C B
CD PLAY 2.8 1.9 2.1
STANDBY 3.3 0 3.3
REF NO.
MODE 123456 123456
POWER ON 6.1 6.2 0 6.1 6.2 12 0 0.7 28.2 28.2 27.5 0
STANDBY 6.1 6.2 0 6.1 6.2 12 0 0.7 28.2 28.2 27.5 0
REF NO.
MODE 12345678
POWER ON 0 25.8 0 1.1 300 300 300 300
REF NO.
MODE 1234
POWER ON 0 0 17.3 2.5
REF NO.
MODE ECB ECB ECB
POWER ON 0 0 0.6 0 0 17.2 0 17.2 0
REF NO.
MODE 1234
POWER ON 3.3 0 1.2 3.3
REF NO.
MODE 123456
POWER ON 3.3 2.2 0 5.3 0 5.3
QR1700
SC-HC397EB/EG DAB ADAPTER P.C.B
SC-HC397EB/EG, SC-HC395EG CD INTERFACE P.C.B
SC-HC397EB/EG, SC-HC395EG SMPS P.C.B.
SC-HC397EB/EG, SC-HC395EG FL P.C.B.