Panasonic SC-HC397

33
8.18. Disassembly of NFC P.C.B.
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove screw.
Step 2 : Slightly lift up to remove Support P.C.B..
Step 3 : Lift up NFC P.C.B..
Step 4 : Detach 2P wire at connector (CN7001) on NFC P.C.B..
Step 5 : Remove NFC P.C.B..