RQT8596
13
Simple Setup
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥ To change your television’s video input mode, refer to its operating instructions.
≥ This remote control can perform some basic television operations (➜ page 33).
To change these settings later
Select “QUICK SETUP” in the “Others” tab (➜ page 26).
1 2 3 4 5 6
Turn on the
unit.
Select
“DVD/CD”.
Press and hold to
show the QUICK
SETUP screen.
Follow the messages and
make the settings.
Press to finish
QUICK SETUP.
Press and
hold to exit.
STEP7 Performing QUICK SETUP
Select
Register
ENTER
(30) (30)
(31, 30)
(30)
(32, 25)
(31) (18) (32)
(30, 31)
SURROUND
ENHANCER
Turn the unit on/off (13)
Select disc’s title numbers etc./Enter numbers (17)
Basic operations for play (16, 17)
Show a disc top menu (19) or program list (20)
Frame-by-frame/Select or register menu items on the
television screen (17)
Show on-screen menu (22) or
display RDS text data ([Continental]Europe] only) (29)
Change the television’s video input mode (33)
Show a disc menu (19) or play list (20)
Return to previous screen (17)
Adjust the volume of the main unit (17)
Select the source
DVD: DVD/CD (13)
TUNER/BAND: FM/AM (28)
EXT-IN: MUSIC P. (32), TV
§
(33), AUX (33)
Cancel (17)
Change the unit’s display (17)
Control reference guide
See page references in parentheses.
SELECTOR (28)
DVD/CD#FM#AM#TV
§
#AUX#MUSIC P.#
Return to DVD/CD
§
]Continental]Europe]
“TV” works only when the scart cable is
connected (➜ page 11).
< OPEN/CLOSE
Open/Close the disc tray (16)
∫ /
-
TUNE MODE /
-
FM MODE
Stop playing (16)/Select the tuning mode (28)
Adjust the FM reception condition (28)
1 / MEMORY
Play discs (16)/Memorize the receiving radio
stations (28)
4, 5 / X TUNING W
Skip or slow-search play (16)/
Select the radio stations (28)
Standby/on switch [Í/I]
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power. (16)
VOLUME
Turn up/down the volume (16)
AC supply indicator [AC IN]
This indicator lights when the unit is
connected to the AC mains supply.
Phones
Connect headphones (32)
MUSIC PORT
Connect an external device (32)
Remote control signal sensor
Television operations (33)
Adjust the television volume (33)
Select preset radio stations (28)
SURROUND ENHANCER ([HT990] only)
Enhancing the surround sound effect (16)
The illustration shows SC-HT990.
[HT990]
To use functions labeled with “
-
”:
Press and hold the button for at least 2 seconds.
The illustration shows SC-HT540.
Display
Performing QUICK SETUP / Control reference guide
8596En_p03-15.fm Page 13 Wednesday, March 29, 2006 10:51 AM
To Next Page
Loading...
