Panasonic SC-HTB170 User Guide

Precautions
Reference Getting started
Before useOperations
RQT9841
5
Beforeuse
Supplied items
Check the supplied accessories before using this system.

≥ Product numbers are correct as of January 2013. These may be subject to change.
To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 31.
≥ The supplied AC power supply cord is for use with this system only.
Do not use it with other equipment. Also, do not use cords from other equipment with this system.
≥ The illustrations shown may differ from your unit.
≥ Operations in this Owner’s Manual are described mainly with the remote control, but you can
perform the operations on the main unit if the controls are the same.
This system
∏ Main unit (Speaker)
(SC-HTB170)
Accessories
∏ 1 Remote control
(with a battery)
(N2QAYC000083)
∏ 1 AC power supply cord
(K2CB2CB00022)
∏ 1 IR Blaster
(K2ZZ02C00007)
∏ 4 Screws
(With washerk2: XYN5+J14FJK)
(Without washerk2:
XSN4+8FJK)
∏ 2 Wall mount brackets
(RMQX1082-K)
∏ 2 Safety holders
(RXA0260)
∏ 2 Basic stands
(RYQ1165-K)
∏ 230
o
stands
(RYQ1166-K)
∏ 280
o
stands
(RYQ1167-K)
SC-HTB170P_RQT9841-P.book Page 5 Friday, January 25, 2013 2:48 PM

Panasonic SC-HTB170 Specifications

General

Audio decoders	Dolby Digital, Dolby Pro Logic II, DTS
RMS rated power	120 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Impedance	6 Ω
Woofer diameter	80 mm
Number of woofer drivers	2
Soundbar speaker RMS power	60 W
Total Harmonic Distortion (THD)	10 %
Subwoofer type	Active subwoofer
Receiver included	No
Number of products included	1 pc(s)
Product color	Black
Recommended usage	TV
Consumer Electronics Control (CEC)	VIERA Link
Apple docking compatibility	Not supported
Soundbar dimensions (WxDxH)	950 x 105 x 66 mm
Connectivity technology	Wired
Digital audio optical in	1
Power source	AC
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (standby)	0.4 W
Power consumption (typical)	22 W

Weight and Dimensions

Soundbar weight	3400 g