16
TQBJ2196
Wireless Connections
Active subwoofer wireless connection
Preparation
Switch on the main unit.
Check that the wireless link is activated.
WIRELESS LINK indicator
On: The wireless link is activated.
Off: The wireless link is not activated.
Blinks: The active subwoofer is trying to activate
the wireless link with the main unit.
Note:
• The wireless link will be activated when the main unit and
the active subwoofer are both switched on.
• The I/D SET button is only used when the main unit is not
paired with the active subwoofer. (~22)
NET connection
You can stream online music service or music
stored on your devices to this system. To use
these features, this system must join the same
internet-connected network as the compatible
device.
Preparation
• Place this system as close to the wireless router
as possible.
• Make sure your smartphone or tablet is
connected to the same network as this system.
1 Press [NET].
Alternatively, press [INPUT] repeatedly to
select “NET” as the source.
Only “NET” indicator blinks, the other selector
indicators are switched off.
2 Download the “Google Home” app (free of
charge) onto your smartphone or tablet.
To download the “Google Home” app, visit:
https://www.google.com/cast/setup/
3 Start the app and follow the on-screen
instructions.
4 Check that the connection has completed.
The “NET” indicator stops blinking and
switches on.
Note:
• Depending on the device, you may need to switch on or off
the Bluetooth
®
function prior to network connection.
• “Panasonic HTB510- ” is shown if the device name is
not set.
(“ ” represents a character that is unique to each set.)
• You can check your network information (SSID, MAC
address and IP address) from the “Google Home” app.
• Certain on-screen display items, etc. of the “Google Home”
app may not apply to this system.
• Availability and performance of certain features, services
and applications are device- and network-dependent and
may not be available in all countries/regions; subscription(s)
may be required, and additional terms, conditions and/or
changes may apply.
Bluetooth
®
connection
You can connect and play an audio device
wirelessly through Bluetooth
®
.
Preparation
• Switch on the main unit.
• Switch on the Bluetooth
®
feature of the device
and put the device near the system.
• Read the operating instructions of the device for
details.
█
Pairing a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (~17).
1 Press [ -PAIRING].
If the “ ” indicator blinks quickly, continue with
step 3.
2 Press and hold [ -PAIRING] until the “ ”
indicator blinks quickly.
If the “ ” indicator blinks slowly, repeat this
step.
3 Select “SC-HTB510” from the Bluetooth
®
menu of the device.
The MAC address (e.g., 6C:5A:B5:B3:1D:0F)
may be shown before “SC-HTB510” is shown.
If prompted for a passkey, input “0000” or
“1234”.
Once the Bluetooth
®
device is connected, the
“ ” indicator stops blinking and switched on.
Note:
You can pair up to 8 devices with this system. If a 9th device is
paired, the device that has not been used for the longest time
will be replaced.
TQBJ2196_en.fm Page 16 Tuesday, February 26, 2019 6:32 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
