EasyManuals Logo

Panasonic SC-HTB510 User Manual

Panasonic SC-HTB510
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
TQBJ2196
To adjust the subwoofer level
Press [SUBWOOFER +] or [SUBWOOFER ‒] to
adjust the level.
Note:
By default, the subwoofer is set at level 3.
To set the surround mode
Press [SURROUND] repeatedly.
Note:
The indicator for the selected setting blinks for 5 seconds and
then exits the setting mode.
Advanced operations
Dual audio
Sets the preferred audio channel mode when there
are two audio modes received by this system.
Press and hold [MUTE] for a minimum of
4 seconds.
Note:
This effect only works if the audio output of the TV or player
is set to “Bitstream” and “Dolby Dual Mono” is available in
the sound source.
The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
Audio format
You can view the current audio format.
Press [SOUND], [MUTE], [SOUND] and [MUTE]
consecutively.
Press within 3 seconds between each button.
Note:
The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
The indicators may work differently if the main unit detects
an unsupported audio format from the connected TV.
This function does not work when “ ” or “NET” is selected
as the source.
Indication Effect levels
5 Highest
4
3
2
1 Lowest
Mode Indication
On
(default)
Off
Audio mode Indication
Main
(default)
Secondary
Main +
Secondary
Audio mode Indication
Dolby Digital
DTS
®
PCM
TQBJ2196_en.fm Page 18 Tuesday, February 26, 2019 6:32 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-HTB510 and is the answer not in the manual?

Panasonic SC-HTB510 Specifications

General IconGeneral
Audio decodersDTS Digital Surround, Dolby Digital
RMS rated power240 W
Audio output channels2.1 channels
Audio Return Channel (ARC)Yes
Wi-FiNo
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio coaxial in0
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (standby)2 W
Product colorBlack
Handheld remote control-
Apple docking compatibilityNot supported
Woofer diameter (subwoofer)6.3 \
Number of full-range drivers2
Weight and Dimensions IconWeight and Dimensions
Width- mm
Soundbar weight- g

Related product manuals