Panasonic SC-HTB510 User Manual

19
TQBJ2196
Auto off
The main unit is automatically switched off if there
is no audio input and when you do not use it for
approximately 20 minutes.
Press and hold [SUBWOOFER +] for a
minimum of 4 seconds to select the mode.
Note:
• The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
• The setting is maintained until it is changed again.
Volume limitation
The volume is set to 50 when you switch on the
system although the volume is set to above 50
before it is switched off.
Press [MUTE], [SOUND], [MUTE] and [SOUND]
consecutively.
Press within 3 seconds between each button.
Note:
• The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
• The setting is maintained until it is changed again.
Dimmer
You can dim or brighten the indicators on the main
unit.
Press and hold [SUBWOOFER ‒] for a
minimum of 4 seconds.
Note:
By default, this function is switched off.
Bluetooth
®
and Network standby
For Australia and New Zealand
This function automatically switches on the system
when you establish a Bluetooth
®
connection from a
paired device or when this system is selected as
the network device’s output speakers.
1 Press [ -PAIRING] or [NET].
2 Press [MUTE], [SUBWOOFER +], [MUTE]
and [SUBWOOFER +] consecutively to
switch on this function.
To switch off this function, press [MUTE],
[SUBWOOFER ‒], [MUTE] and
[SUBWOOFER ‒] consecutively.
Press within 3 seconds between each button.
Note:
• The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
• The setting is maintained until it is changed again.
• When the system is switched on by this feature, the
beginning part of the music may not be played back.
• Depending on the app, the conditions for activating this
function may differ.
• The system may not be switched on even when selected as
the output speakers. Start playback.
• If the AC mains lead is disconnected, the standby function
may not work. Make the setting again.
Mode Indication
On (default)
Off
Mode Indication
On (default)
Off
Mode Indication
On (default)
Off
TQBJ2196_en.fm Page 19 Tuesday, February 26, 2019 6:32 PM

Panasonic SC-HTB510 Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	240 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio coaxial in	0
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (standby)	2 W
Product color	Black
Handheld remote control	-
Apple docking compatibility	Not supported
Woofer diameter (subwoofer)	6.3 \
Number of full-range drivers	2

Weight and Dimensions

Width	- mm
Soundbar weight	- g