Panasonic SC-HTB510 User Manual

24
TQBJ2196
Indicators illumination
The indicators show the condition of this system. The indicator patterns illustrated below are shown
during normal operational conditions. They do not refer to the indications of a problem.
Indicators Description
The indicator blinks for 5 seconds.
• When surround is set to off. (~18)
• When the setting is on
(“Auto off”, “Bluetooth
®
standby”, “Network standby”, “Volume
limitation”). (
~19)
• When the audio format is Dolby Digital. (~18)
The indicator blinks for 5 seconds.
• When surround is set to on. (~18)
• When the audio format is DTS
®
. (~18)
The indicator blinks for 5 seconds.
• When the setting is off
(“Auto off”, “Bluetooth
®
standby”, “Network standby”, “Volume
limitation”). (
~19)
• When the audio format is PCM. (~18)
The indicator blinks for 10 seconds.
• When the remote control is set to code 1. (~23)
The indicator blinks for 5 seconds.
• When the dual audio is main. (~18)
The indicator blinks for 5 seconds.
• When the dual audio is secondary. (~18)
The indicator blinks for 10 seconds.
• When the remote control is set to code 2. (~23)
The indicator blinks for 5 seconds.
• When the dual audio is main+secondary. (~18)
The indicators blink continuously.
• When the sound is muted. (~17)
The indicator blinks quickly.
• When the main unit is ready for pairing. (~16)
The indicator blinks slowly.
• When the main unit is waiting to connect. (~17)
The indicator switched on.
• When the main unit is connected to a Bluetooth
®
device. (~17)
The indicator blinks.
• When the main unit is not connected to any network.
The indicator switched on.
• When the main unit is connected to a network. (~16)
All indicators The indicators blink until the system restarts.
• When the main unit is reset. (~23)
The indicators blink 10 times.
• When active subwoofer failed to connect. (~22)
TQBJ2196_en.fm Page 24 Tuesday, February 26, 2019 6:32 PM

Panasonic SC-HTB510 Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	240 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio coaxial in	0
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (standby)	2 W
Product color	Black
Handheld remote control	-
Apple docking compatibility	Not supported
Woofer diameter (subwoofer)	6.3 \
Number of full-range drivers	2

Weight and Dimensions

Width	- mm
Soundbar weight	- g