9
TQBJ2196
Connecting a 4K Ultra HD TV
The system cannot pass-through the 4K video signal of a 4K compatible equipment to a 4K Ultra HD TV.
However, you can connect the system to a 4K Ultra HD TV to enjoy the 4K content.
* Make sure to connect the HDMI cable to ARC compatible terminals.
Note:
• Refer to the operating instructions of the 4K Ultra HD TV (VIERA) and the 4K/60p compatible equipment for setup and for
playing the 4K content.
• To enjoy multi-channel output from this system, set the audio output of other equipment to Bitstream.
• The audio signal input to this system is up to 5.1 channels.
Connecting the AC mains lead
Conserving power
The system consumes a small amount of power when it is in standby mode. Disconnect the power supply
if you do not use the system.
Note:
The active subwoofer is in the standby condition when the AC mains lead is connected. The primary circuit is always “live” as long
as the AC mains lead is connected to an electrical outlet.
The main unit will automatically switch to standby mode when no signal is input and no operation is
performed for approx. 20 minutes. Refer to page 19 “Auto off” to switch this function off.
HDMI IN (ARC) HDMI IN (4K)
HDMI OUT
TV
e.g., Blu-ray Disc player
(4K compatible)
HDMI cable*
HDMI cable
AC mains lead
To household
mains socket
To household
mains socket
TQBJ2196_en.fm Page 9 Tuesday, February 26, 2019 6:32 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
