RQT9834
15
You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to
this system.
Preparation
≥Connect the main unit to the TV. (> 14)
A HDMI cable B e.g., Blu-ray Disc player
≥ Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video and
audio signals.
A Digital transmitter (supplied)
Insert the digital transmitter, with the label facing down, until you hear a click.
Connection from an HDMI compatible device
HDMI IN
B
HDMI OUT
A
∫ HDMI standby pass-through
Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the HDMI IN terminal will be
sent to the TV connected to the HDMI OUT terminal (the sound will not be output from this system).
∫ 3D compatibility
Compatible with FULL HD 3D TV and Blu-ray Disc player.
≥ The main unit can pass through the 3D video signal from a 3D compatible Blu-ray Disc player to a FULL HD 3D TV.
Digital transmitter connection
Do not insert or remove while the main unit is turned on.
SC-HTB527EGEB_RQT9834-B.book 15 ページ ２０１２年１２月１０日 月曜日 午前１１時２９分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
