6.2. Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below
are displayed during normal operational conditions. They do not refer to the indications of a problem.
Refer to “Troubleshooting” if the indicators do not light up as illustrated below.
1 The selected source indicator will also light.
2 The BD/DVD indicator stops blinking and lights once the wireless pairing is successful.
noitpircseDrotacidnI
The indicators blink simultaneously.
When “MUTE” is on
The BD/DVD indicator blinks
2
and audio format indicators light up in
sequence for 1 minute.
When the main unit is in wireless pairing mode with the active subwoofer
The indicator blinks for 10 sec.
When the dialog effect level or the subwoofer level is 1
When the audio output mode is Multi-channel mode
When the dual audio setting is Main
When the auto gain control is on
When 3D surround effect and clear-mode dialog effect are on
When the auto standby function is on
The indicators blinks for 10 sec.
When the dialog effect level or the subwoofer level
is 2
When the audio output mode is Auto mode
The indicator blinks for 10 sec.
When the audio output mode is Auto mode
The indicators blinks for 10 sec.
When the dialog effect level or the subwoofer level is 3
The indicator blinks for 10 sec.
When the dialog effect level or the subwoofer level is 4
When the audio output mode is 2ch mode
When the dual audio setting is Secondary
When the auto gain control is off
When 3D surround effect and clear-mode dialog effect are off
When the auto standby function is off
The indicators blink for 10 sec.
When the dual audio setting is Main and Secondary
The indicators blink for 10 sec.
When the remote control code is changed
The indicators blink once.
When changing the setting (“To reduce the clear-mode dialog effect”, “To turn
off VIERA Link “HDAVI Control””, and “To turn off the volume limitation”)
1
To Next Page
Loading...
