Panasonic SC-HTB550GK

80
Step 9 : Upset the Main P.C.B. as arrow shown.
Step 10 : Place the Main P.C.B. on an Insulated Material.
Step 11 : Main P.C.B. (B side) can be checked and repaired as
diagram shown.
12.1.3. Checking and Repairing of SMPS
P. C .B .
Step 1 : Remove Top Cabinet.
Step 2 : Remove SMPS P.C.B..
Step 3 : Attach 9P FFC at the connector (CN1) on SMPS
P. C . B . .
Step 4 : Attach 6P Cable Wire at the connector (CN5900) on
DAMP P.C.B..
Step 5 : Upset SMPS P.C.B. as arrow shown.
Step 6 : Place the SMPS P.C.B. on an Insulated Material.
Step 7 : SMPS P.C.B. can be checked and repaired as diagram
shown.