Panasonic SC-HTB550GK

82
12.1.5. Checking and Repairing of DAMP
P.C.B. (Side B)
Step 1 : Remove Top Cabinet.
Step 2 : Remove Rear Panel.
Step 3 : Detach 40P FFC at the connector (CN5200) on DAMP
P. C . B . .
Step 4 : Detach 40P FFC at the connector (CN2201) on Main
P. C . B . .
Step 5 : Upset the DAMP P.C.B. as arrow shown.
Step 6 : Place the DAMP P.C.B. on an Insulated Material.
Step 7 : Attach 40P Extension FFC (RFKZHTB15) from the
connector (CN2201) on the Main P.C.B. to the connector
(CN5200) on DAMP P.C.B..
Step 8 : DAMP P.C.B. (B side) can be checked and repaired as
diagram shown.
12.1.6. Checking and Repairing of Panel
P. C .B .
Step 1 : Remove Top Cabinet.
Step 2 : Remove Front Panel Block.
Step 3 : Remove Button P.C.B. and Panel P.C.B..
Step 4 : Attach 2P Cable Wire at the connector (CN2206) on
Main P.C.B..
Step 5 : Attach 17P FFC at the connector (CN2205) on Main
P. C . B . .
Step 6 : Attach 11P FFC at the connector (CN2204) on Main
P. C . B . .
Step 7 : Panel P.C.B. (B side) can be checked and repaired as
diagram shown.