Panasonic SC-MAX370 - Disc Playback; Playing a Disc; Playback Modes; Programmed Playback

VQT5F34
8
Disc
1
Press [ OPEN/CLOSE] on the main unit to open
the disc tray.
Put in a disc with the label facing up.
Press [ OPEN/CLOSE] again to close the disc
tray.
2 Press [CD] and then press [1/;] to start
playback.
You can view the available information on the display
panel.
Press [DISPLAY-DIMMER] during playback.
Note:
• Maximum characters that can be shown:
approximately 32
• This system supports ver. 1.0, ver. 1.1 and ver. 2 ID3 tags.
• Text data that the system does not support can show
differently.
1 Press [PLAY MENU] to select “PLAYMODE” or
“REPEAT”.
2 Press [2, 1] and then press [OK] to select the
desired mode.
Note:
The setting returns to the default “OFF PLAYMODE” when
you open the disc tray.
This function allows you to programme up to 24 tracks.
1 Press [PROGRAM] in the stop mode.
“PGM” or “PROGRAM” is shown.
2
Press the alphanumeric buttons to select the
desired track.
Do this step again to programme other tracks.
1 Press [3, 4] to select the desired album.
2 Press [9] and then press the alphanumeric
buttons to select the desired track.
3 Press [OK].
Do these steps again to programme other tracks.
3 Press [1/;] to start playback.
Playing disc
• Stop playback
Press [∫].
• Pause playback
Press [1/;].
Press again to continue playback.
• Skip album
Press [3, 4].
• Skip track
Press [:] or [9]
(main unit: [:/6] or [5/9]).
• Search through track
Press and hold [6] or [5]
(main unit: [:/6] or [5/9]).
Viewing available information
Play menu
PLAYMODE
•OFF PLAYMODE
Play all tracks.
• 1-TRACK
Play one selected track on the disc.
Press the alphanumeric buttons to select the track.
• 1-ALBUM
Play one selected album on the disc.
Press [3, 4] to select the album.
• RANDOM
Play a disc randomly.
• 1-ALBUM RANDOM
Play all tracks in one selected album randomly.
Press [3, 4] to select the album.
REPEAT
• ON REPEAT
Repeat playback.
“`” appears.
• OFF REPEAT
Cancel repeat playback.
Programme playback
• Cancel programme mode
Press [PROGRAM] in the stop mode.
• Check programme contents
Press [:] or [9] when “PGM” is shown in the
stop mode.
• Clear the last track
Press [DEL] in the stop mode.
• Clear all programmed tracks
Press [∫] in the stop mode.
“CLR ALL” is shown.
Within 5 seconds, press [∫] again.
8
SC-MAX370GS_eng_sch_rus_ukr.book 8 ページ ２０１４年３月１２日 水曜日 午後６時４９分