15
RQT5717
Listening operations
1
2
3
4
A
VOLUME
UPDOWN
12
3
456
790
10
CANCEL
AUTO OFF
SLEEP
8
PROGRAMTUNE MODE PLAY MODE
VOLUME
DISPLAY
DIMMER
MUTING
SOUND
VIRTUALIZER
REV MODE
SELECTOR
TAPETUNER CD
CLOCK
TIMER
PLAY
REC
REW
CLEAR
FF
BASS
TREBLE
REV
MODE
2
3
4
1
POWER
dB
FWD
side to be played
facing up
FWD
PLAY
Tape direction
Cassette tapes
1 Press [POWER ] to turn the unit on.
2 Insert the cassette with the exposed
tape facing left.
Tape direction is automatically set “
FWD
”
3 Press [TAPE2 3] to start playback.
Every time you press the button:
REV
↔
FWD
FWD
: The forward side (front side) will play.
REV
: The reverse side will play.
4 Adjust the volume.
To stop tape playback
Press [STOP L].
To eject tape
Press [STOP L] then press [EJECT c].
One-touch play
When the system is OFF and cassette is inserted, play starts
automatically when you press [TAPE 2 3].
To select the reverse mode
by remote control only
Press [REV MODE] to select the reverse mode.
Every time you press the button:
:
One side is played.
: Both sides are played repeatedly until [ CLEAR] is pressed.
: Both sides are played.
Cassette tape selection and care
Types of tapes which can be played correctly.
The system automatically identifies the type of tape.
NORMAL POSITION/TYPE I ✓
HIGH POSITION/TYPE II ✓
METAL POSITION/TYPE IV ✓
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Tape slack can get caught up in the mechanism and should be
wound up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts if used
incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.
A
e14-16 1/17/01, 6:31 PM15
To Next Page
Loading...
Need help?
General
