EasyManua.ls Logo

Panasonic SC-PM270 - DAB+ Radio Operation and Tuning; Manual DAB+ Station Scanning; Automatic DAB+ Station Scanning

Panasonic SC-PM270
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
TQBM0933
D:\A_Job\PSG\_FY22\SC-PM270\Source\woi\PM272EB.EG_TQBM0933_EN.fm
DAB+
[PM272]
Preparation
Press [RADIO] (main unit: [SELECTOR]) repeatedly to select “DAB+”.
Note:
If you select “DAB+” for the first time, the system will tune automatically.
Manual tuning
1 Press [PLAY MENU] repeatedly to select “MANUAL SCAN”.
2 Press [R, T] to select the frequency block and then press [OK].
If no station is detected, “SCAN FAILED” is shown.
Adjust the antenna and try again.
Automatic tuning
1 Press [PLAY MENU] to select “AUTOSCAN” and then press [OK].
“START?” is shown.
2 Press [OK] to start tuning.
“DAB AUTO SCAN” is shown.
If no station is detected, “SCAN FAILED” is shown.
Do manual tuning.
Note:
Preset frequencies are erased after you do automatic tuning.
Memory presetting
You can preset up to 20 stations.
1 Press [PLAY MENU] repeatedly to select “TUNEMODE”.
2 Press [R, T] to select “STATION” and then press [OK].
3 Press [2/3] or [5/6] to tune in to the station.
4 Press [OK].
5 Press [R, T] to select a preset number and then press [OK].
Do steps 3 through 5 again to preset more stations.
The new station replaces any station that occupies the same preset number.
Note:
You cannot preset a station when the station is not broadcasting or when you have selected a secondary
service.
Selecting a preset station
1 Press [PLAY MENU] repeatedly to select “TUNEMODE”.
2 Press [R, T] to select “PRESET” and then press [OK].
3 Press [2/3] or [5/6] to select the preset station.
PM272EB.EG_TQBM0933_EN.fm Page 19 Wednesday, August 30, 2023 4:20 PM

Other manuals for Panasonic SC-PM270

Related product manuals