Panasonic SD-251 - Control panel-display;functions; Control Pad Functions; Display Window and Indicating Light

Control panel-display/functions
Be sure you understand the function of each pad before using the read Rakerye.
NOTE: The unit has a protective film overlay on the control panel to prevent scratching or marring
during shipping.
Display window
All modes and indications are shown here for reference.
You may peel this film off and discard it.
SELECT
Press to select the type of bread: basic, whole wheat,
multigrain, french, pizza or bake only.
(It is not necessary to press this pad for basic. )
Each time the pad is pressed, the display will
change accordingly.
Panasonic
SD-251
OPTION
Press to choose the bake option: BAKE, BAKE
RAPID, BAKE SANDWICH, BAKE RAISIN,
DOUGH or DOUGH RAISIN.
(It is not necessary to press this pad for BAKE .)
Each time the pad is pressed, the display will
change accordingly.
SIZE
Press this pad to select the size of the loaf for:
BAKE, BAKE RAPID & BAKE RAISIN options of
basic and wholewheat loaves.
CRUST
Press this pad to select the colour of the crust
for BAKE, BAKE RAPID & BAKE RAISIN options
of basic loaf.
TIMER
Press this pad to set the timer and to set the
baking time for the bake only option.
The time will advance 10 minutes each time this pad
is pressed. (1 minute for the bake only option.)
The timer setting will change rapidly if constant
pressure is applied to the pad.
Indicating light
The red light will be lit when in operation.
It will flash when the bread baking or the dough
making is completed.
It will also flash in a different frequency when
operated in abnormal conditions.
START/STOP
Press this pad to start operation or begin the timer.
Press this pad to stop operation or cancel the timer setting.
To stop operation, the pad must be pressed and
held for 1 second.