25VQT1R13 25VQT1R13
Record motion and still pictures onto the SD card.
Recorded motion and still pictures are referred to as “scenes” with this unit.
Do not perform any of the following operations while the SD card
is being accessed (card access lamp illuminated). Performing
these actions may damage the card and its data.
• Turning off the unit
• Removing battery or AC adaptor
• Opening card/battery door and removing
SD card
• Rotating the mode dial
• Shaking or impacting the unit
Card access lamp
Card/battery door
Note
Recording can be done in two ways: “Automatic recording”
or “Manual recording”.
Automatic recording (motion/still pictures)
(This is the default setting at the time of purchase)
● To have colouring, focus, and brightness settings made
automatically
See
P.26-29
Manual recording (motion/still pictures)
(Manually adjust settings such as focus, white balance, shutter speed,
iris/gain, etc.)
● To record with your own settings
● When automatic recording is unsatisfactory
● To use settings for particular scenes (scene mode)
See
P.38-43
● For SD cards applicable with this unit (P.12)
To Next Page
Loading...
