Panasonic SU-7 Series - Options and Accessories; Slit Mask (OS-SS3); Sensor Head Mounting Brackets; Sensor Checker (CHX-SC2)

Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7 SERIES SH SERIES
5
ORDER GUIDE
OPTIONS
Designation Model No. Description
Slit mask
For SH-31R,
SH-31G and
SH-33R only
OS-SS3
This is a convenient slit mask having four types of slit masks.
Slit size Fitting
Sensing range
Min. sensing
object
SH-31R SH-31G SH-33R
0.5 × 3 mm
0.020 × 0.118 in
One side
500 mm
19.685 in
50 mm
1.969 in
750 mm
29.528 in
ø3 mm
ø0.118 in
Both sides
250 mm
9.843 in
25 mm
0.984 in
400 mm
15.748 in
0.5 × 3 mm
0.020 × 0.118 in
1 × 3 mm
0.039 × 0.118 in
One side
700 mm
27.559 in
70 mm
2.756 in
1,000 mm
39.370 in
ø3 mm
ø0.118 in
Both sides
500 mm
19.685 in
50 mm
1.969 in
750 mm
29.528 in
1 × 3 mm
0.039 × 0.118 in
Sensor head
mounting bracket
For the ultra-
small type only
MS-SS3-1
Mounting bracket for the ultra-small sensor head
(The thru-beam type sensor head needs two brackets)
Sensor head
mounting bracket
For the mark
sensor only
MS-DS-1
Mounting bracket for the mark sensor head
Sensor head
mounting bracket
For SH-61R
only
MS-SH6-2
The emitter and the receiver are xed together at an angle for use
as a convergent reective type sensor.
Sensor checker
CHX-SC2
It is useful for beam alignment of thru-beam type sensors.
The optimum receiver position is given by indicators, as well as an
audio signal.
Plug-in connector type
It is usable with the sensor & wire-saving link system S-LINK, sensor block for simple wiring SL-BMW or SL-BW, or with connector attached
cable CN-54-C2 or CN-54-C5.
Sensor & wire-saving link system
S-LINK
Sensor block for simple wiring
SL-BMW, SL-BW
Connector attached cable
CN-54-C2 (2 m 6.562 ft long)
CN-54-C5 (5 m 16.404 ft long)
Accessories
• MS-DIN-2
(Amplier mounting bracket)
• SU-CT1
(Exclusive stripper)
SU-7J
SU-7J
SU-7J
• MS-SH6-1
(Sensor head mounting bracket for SH-61R)
Slit mask
• OS-SS3
The sensor head and the slit mask are mounted
together.
Sensor head mounting bracket
• MS-SS3-1
Two M3 (length 12 mm
0.472 in) screws with
washers are attached.
• MS-SH6-2
No screw is attached.
• CHX-SC2
Sensor checker
• MS-DS-1
Two M3 (length 14 mm
0.551 in) screws with
washers are attached.
LEVEL POWE
R
CH X-S C2
Sensor
checker
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.