11
Inserting a Memory Card
An SD Memory Card can be used for this SD Multi AV
Device.
1 Hold the Memory Card placing the cut off
corner
1 at the front with the label 2
facing up, and then insert it fully into the
Memory Card Slot horizontally.
≥Turn off the SD Multi AV Device before inserting
a Card.
ª Removing the Memory Card
Slide the Card Eject Lever 3 to remove the
Memory Card and pull it out.
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
CARD EJECT
!
1
AV30U.book11ページ２００３年４月２日 水曜日 午前１１時４０分
To Next Page
Loading...
