Panasonic SV-AV30 - Recording Pictures Supplied from an External Device

38
AV OUT AV IN
AV IN SD AV OUT
SD PLAY
LCD MONITOR
AV IN AV OUT

DC IN 4.8V
Recording pictures supplied from an external
device
1 Put the SD Multi AV Device in the AV
Cradle. (l 35)
2 Connect the [AV IN] socket of the AV
Cradle to the AV Output Sockets of the
external device 2 using supplied AV
Cable
1.
3 Set the AV Input Control Switch to
[AV IN
SD].
4 Set the Power/Mode Switch to [REC] and
set the operation mode to [PICTURE] or
[MPEG4].
5 Select desired image quality. (l 20, 22)
6 Set up the external device.
≥Confirm that the image or sound signal is input
into the SD Multi AV Device.
7 Press the Recording Start/Stop Button.
≥Recording starts.
≥When the moving picture is being recorded,
press the Recording Start/Stop Button again to
stop recording.
7
4
REC
OFF
PLAY
MODE
AV30U.book38ページ２００３年４月２日 水曜日 午前１１時４０分