7
5 Service Mode
5.1. How to enter into Service Mode
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.
5.1.1. Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
5.1.2. Contents of adjustment mode
• Value is shown as a hexadecimal number.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.
5.1.3. How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
Main item Sub item Sample Data Remark
ADJUST CONTRAST 000
COLOR 42
TINT 00
SUB-BRT 808
BACKLGT 27B
B-Y-G 36
R-Y-A 00
WB-ADJ R-GAIN FF
G-GAIN F1
B-GAIN E6
R-CENT 7F
G-CENT 80
B-CENT 70
OPTION Boot ROM Factory Preset.
STBY-SET 00
Emergency OFF
CLK MODE 00
CLOCK 000
RM-SET CODE A Fixed.
SRV-TOOL 00 See next.
To Next Page
Loading...
