TC-L42E5X
13
7 Disassembly and Assembly Instructions
7.1. Control Panel Preparation
1. Fit the GK plate on the key button guide pins indicated by the pointed arrows.
2. Screw in the positions indicated using the corresponding torque.
3. Connect the cable to the GK plate connector.
No. Part Num. Quant. Description
1 TBX5ZA00601 1 KEY_BUTTON
2 TXNGK1SLUU 1 GK PANEL COMPLETE FROM KATOLEC
3 TXJ/P4SLUU 1 CABLE ASSY (P4-LD/GK4)
To Next Page
Loading...
