TC-L42E5X
20
7.8. Screwing up Brackets
1. Place the metal Vesas in the positions indicated. Fig A
2. Place the bottom metal part in the position indicated. Fig B
3. Screw in the positions indicated using the corresponding torque.
4. Insert the clampers in the position indicated. Fig B
Note: Use metal part without (-1) for PP2, the next production will be received with (-1)
No. Part Num. Quant. Description
1 TKZ5ZX5011 1 BOTTOM_METAL
2 TKZ5ZX5006-1 2 VESA METAL
To Next Page
Loading...
