Panasonic TC-P60VT60 - VIERA Touch Pad Controller Guide; Touch Pad Controller Features; Pairing and Using the Touch Pad

19
9.2. Disassembly Procedure for the Unit
9.2.1. Remove the Pedestal stand
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the screws (×4 )
3. Slide the Pedestal stand to the downside and remove the
Pedestal stand.
9.2.2. Remove the Bottom cover
1. Remove the screws (×4 ) and remove the Bottom
cover.
9.2.3. Remove the AC cord clamper B
1. Remove the screws (×2 ) and remove the AC cord
clamper B.
9.2.4. Remove the Wi-Fi module
1. Remove the screw (×1 ) and remove the Wi-Fi
module.
9.2.5. Remove the Bluetooth module
1. Remove the screw (×1 ) and remove the Dongle
cover.
2. Remove the Pin guides (×2 ) and disconnect the BT
connector.
3. Remove the Bluetooth module.
9.2.6. Remove the Camera bracket cover
1. Remove the screws (×2 ) and remove the Camera
bracket cover.