Panasonic TC-P60VT60 - Using the Built-in eHELP; Accessing the eHELP Manual; Navigating eHELP Content

22
9.2.13. Remove the Woofer
1. Unlock the hooks and the tapes to free the cables.
2. Disconnect the Relay connector.
3. Remove the screws (×3 ) and remove the Woofer.
9.2.14. Remove the Camera unit
1. Unlock the hooks and the tapes to free the cables.
2. Disconnect the USB cable (A-SKYPE).
3. Remove the screws (×4 ) and remove the Camera
unit.
9.2.15. Remove the Fan
1. Unlock the hooks and the tapes to free the cables.
2. Remove the screws (×3 each).
3. Disconnect the Relay connector and remove the Fans.
9.2.16. Remove the SU-Board
1. Disconnect the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (×3 , ×1 ) and remove the SU-
Board.