Panasonic TC-P60VT60 - TV Operation Basics; Powering On and Home Screen; Selecting TV Sources; Accessing TV Applications

21
9.2.10. Remove the A-Board
1. Unlock the hooks and the tapes to free the cables.
2. Disconnect the connectors (A1, A6, A8A and A12).
3. Disconnect the USB cables (JK8605 and JK8607).
4. Disconnect the flexible cables (A20, A31, A32 and A33).
5. Remove the screws (×4 ).
6. Remove the Side shield metal and the Bottom shield
metal.
7. Remove the A-Board.
8. Remove the screws (×5 ).
9. Remove the Heatsinks (bottom-1, -2), the Thermal
conductive sheets and the Heat rubber.
9.2.11. Remove the Control unit assy
1. Unlock the tape to free the cables.
2. Disconnect the connector (C14).
3. Remove the claws (×2 ) and remove the Control unit
assy.
9.2.12. Remove the Speaker SQs
1. Unlock the hooks and the tapes to free the cables.
2. Remove the screws (×6 each) and remove the
Speaker covers (L, R).
3. Disconnect the Relay connector.
4. Remove the screws (×2 each) and remove the
Speaker SQs (L, R).